|
|
|
 |
Seals for Steel Tools
These are the steel seals used in the FROMM range of manual and Pneumatic strapping tools. Sizes of the seals are dependent on the type of tool selected and size advice is available on request.
|
 |
Steel Strapping Cutter
This steel strapping cutter cuts standard and high tensile steel strapping of widths between 13mm – 19mm and thickness between 0.38mm – 0.8mm.
|
 |
Steel Safety Cutter
This steel safety cutter cuts standard and high tensile steel strapping of widths between 13mm – 32mm and thickness between 0.38 – 1mm. Because it has rubber safety strips it enables both ends of the steel strapping to remain in the jaws therefore stopping any recoil of steel when cut.
|
 |
Oscillated Coil Dispenser
This is an oscillated steel strapping dispenser which can dispense both standard and high tensile steel strapping of widths between 13mm – 19mm. The tray is used for the holding of any manual strapping tool and seals if required.
|
 |
Ribbon Wound Coil Dispenser
This is a ribbon wound steel strapping dispenser which is adjustable to dispense both standard and high tensile steel strapping of widths between 13mm – 32mm. The tray is used for the holding of any manual tool and seals if required.
|
 |
Strap Chopper
This is a steel strap chopper which is able to chop both standard and high tensile steel strapping of widths between 10mm – 32mm and of thickness between 0.38mm – 1.25mm. By using a strap chopper to reduce steel to small lengths major cost savings are achieved by removing the necessity for skips used to remove steel strapping.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|